INTEGRATED TECHNOLOGY FOR THE RECOVERY OF IRON, SILVER, AND COPPER FROM ZINC PRODUCTION WAELZ CLINKER

Authors

  • Uzokov Shahrizod Zafarjon ugli Karshi State Technical University image/svg+xml Author

Keywords:

zinc production, Waelz clinker, technogenic waste, microwave roasting, magnetic separation, hydrometallurgical leaching.

Abstract

This study investigates a technology for recovering valuable components from clinker generated during the Waelz process in zinc production. The clinker was characterized using chemical, mineralogical, and instrumental methods. Microwave thermal treatment was applied to reduce carbon and sulfur contents and improve separation. Magnetic separation was used to obtain an iron-rich concentrate, while the non-magnetic fraction was processed by hydrometallurgical leaching. Silver was leached using the Jinchan reagent and recovered from solution by zinc powder cementation. Copper was subsequently extracted from the residue through sulfuric acid leaching. The results demonstrate the potential for recovery of valuable metals from zinc industry waste.

References

1.Bikbaeva, G. A., Orekhova, N. N., & Kulikova, E. A. (2013). Application of clinker in the integrated technology for processing technogenic wastewater from mining and metallurgical enterprises. Vestnik of Nosov Magnitogorsk State Technical University, 2(42), 22–25.

2.Toshkodirova, R. E. (2020). Development of an effective technology for processing clinker in zinc production. Doctoral dissertation, Tashkent.

3.Kozin, V. Z. (2001). Waste-free technologies in mining production. Izvestiya Vysshikh Uchebnykh Zavedeniy. Gornyi Zhurnal, 4–5, 169–190.

4.Qayumov, O. A., & Uzoqov, Sh. Z. (2025). Investigation of methods for developing the processing technology of clinker generated during the Waelz process. Digital Technologies in Industry, 3(2), 101–104.

5.Klein, S. E., Kozlov, P. A., & Naboychenko, S. S. (2009). Extraction of zinc from mineral raw materials. Yekaterinburg: UGGU-UPI.

6.Grudinskiy, P. I., Zinoveev, D. V., Dyubanov, V. G., & Kozlov, P. A. (2019). Current status and prospects for the processing and utilization of Waelz clinker from zinc-containing dust generated during electric arc steelmaking. Perspektivnye Materialy, 4, 73–83.

7.Antrekowitsch, J., Rösler, G., & Steinacker, C. (2015). State of the art in steel mill dust recycling. Chemie Ingenieur Technik, 87(11), 1498–1503.

8.Vegas, I., Ibanez, J. A., San Jose, J. T., & Urzelai, A. (2008). Construction demolition wastes, Waelz slag and MSWI bottom ash: A comparative technical analysis as material for road construction. Waste Management, 28, 565–574.

9.Barna, R., Bae, H.-R., Mehu, J., van der Sloot, H., Moszkowicz, P., & Desnoyers, C. (2000). Assessment of chemical sensitivity of Waelz slag. Waste Management, 20, 115–124.

10.Allabergenov, R. D., Akhmedov, R. K., & Khodjaev, O. F. (2013). Integrated processing of non-ferrous metallurgy waste. Tashkent: Universitet.

11.Evdokimov, S. I., & Panshin, A. M. (2009). Selection of a technology for beneficiation of clinker from Waelz zinc cakes. Izvestiya Vysshikh Uchebnykh Zavedeniy. Tsvetnaya Metallurgiya, 2, 19–25.

12.Al-Harahsheh, M., & Kingman, S. W. (2004). Microwave-assisted leaching—a review. Hydrometallurgy, 73(3–4), 189–203. https://doi.org/10.1016/j.hydromet.2003.10.006

Downloads

Published

2026-09-29