DEVELOPMENT OF A TECHNOLOGY FOR THE EXTRACTION OF LEAD AND ITS COMPOUNDS FROM TECHNOGENIC WASTE

Authors

  • Haqberdiyev Dilshod Qodir ugli Assistant, Department of Geology and Mining Engineering Karshi State Technical University Author

Keywords:

Keywords: technogenic dust, hydrometallurgy, rhenium, lead, non-ferrous metals, metal recovery.

Abstract

Abstract. This study investigates an integrated hydrometallurgical technology for recovering valuable metals from lead-bearing technogenic dust generated during copper production. The proposed process involves soda treatment, oxidative leaching, nitric acid leaching, selective lead precipitation, and subsequent recovery of metal compounds. The effects of technological parameters on metal extraction were evaluated. The results demonstrated that rhenium recovery into solution reached 95.4%, while the extraction of lead, copper, zinc, and cadmium reached 83.74%, 95.07%, 98.1%, and 95.5%, respectively. Lead precipitation efficiency as lead sulfate reached 99.99%. The developed approach supports comprehensive waste utilization and reduces the environmental impact of metallurgical residues.

References

1.Yusupkhodjaev, A.A. (2019). Scientific and Technical Foundations of Technologies for Processing Technogenic Waste. Tashkent: Tashkent State Technical University.

2.Saidakhmedov, A.A., Khudoyarov, S.R., & Mirzanova, Z.A. (2020). Development of a technology for producing lead from converter dust. Tekhnika, No. 2, pp. 20–23.

3.Gao, W., Xu, B., Yang, J., et al. (2021). Comprehensive recovery of valuable metals from copper smelting open-circuit dust with a clean and economical hydrometallurgical process. Chemical Engineering Journal, 424, Article 130411.

4.Wu, J.Y., Chang, F.C., Wang, H.P., et al. (2015). Selective leaching process for the recovery of copper and zinc oxide from copper-containing dust. Environmental Technology, 36, pp. 2952–2958.

5.Cheema, H.A., Bhatti, I.A., Srivastava, R.R., et al. (2022). Dissolution of molybdenite roasting flue dust in sulfuric acid: Kinetics and mechanism for molybdenum and rhenium leaching. Chemical Papers, 76, pp. 4049–4058.

6.Dosmukhamedov, N., Zholdasbay, E., & Argyn, A. (2023). Extraction of Pb, Cu, Zn and As from fine dust of copper smelting industry via leaching with sulfuric acid. Sustainability, 15, Article 15881.

7.Nakhaei, F., Locmelis, M., Alagha, L., et al. (2025). Characterization and leaching feasibility studies of copper flue dust for the recovery of main and trace metals. Journal of Sustainable Metallurgy, 11, pp. 2215–2235.

8.Wang, X., et al. (2025). Valuable metals recovery and hazardous waste elimination from copper smelting dusts: A review. Separation and Purification Technology.

9.Zotov, M.A. (2025). The role of green innovations and green advanced manufacturing technologies in reducing waste generation in the metallurgical complex. Progressive Economics, No. 11, pp. 263–283.

10.Research and Development Report (2002–2006). Development of a Technology for the Integrated Processing of Copper Production Dusts with the Recovery of Rhenium and Non-Ferrous Metal Compounds.

Downloads

Published

2026-07-30